Home
Deburring 
Fastener Insertion 
Graining
Polishing Machines
Oxide Film Removal
Lasers
Contact Us 

 
 

Deburring Two Sides In One Pass

Haeger SBM – S for Deburr and Edge Rounding

With this new machine you will deburr both sides of the sheet at one time Creating no sharp edges that may need to be hammered.

Completely deburr and round the edges on internal and external edges.

The unique system used will offer long and even wear of consumables. Creating a very cost and time effective process.

Since only the edges are deburred the surface is not damaged, this means there is very little environmental waste.

Two sides in one pass, low environmental impact, much quieter than tradional methods means a much safer work place for your employees.

Features:
  • Deburr and edge rounding two sides in one pass
  • No need to turn sheet over.
  • Deburr all internal and external edges.
  • Dry operation - no removal of water or rust required.
  • Deburr sheets protected with film without damage of film
  • No damage to material surfaces
  • 60% faster than traditional methods
  • Consistent high quality edges

Technical Data 

SBM-B 1000

SBM-B 1500

Working Width

40.0”

60.0”

Max. Material Thickness

0.625”

0.625”

Brush Head Motor Power

4 x 4.8 kW

4 x 4.8 kW

RPM

1400

1400

Voltage

480V/ 60 Hz

480V/ 60 Hz

Electrical Disconnect

60 A

60 A

Electrical Standard

IP 54

IP 54

Noise Level

82 dB(A)

82 dB(A)

Maximum Work Piece Weight

660 lbs

660 lbs

Adjustment Material Thickness

Fully variable – Manual Adjustment by Hand Wheel

Adjustment Brush Depth

Fully variable – Manual Adjustment by Hand Wheel

Dimensions in Inch

 

 

Length

86.0”

109.0”

Width

52.0”

52.0”

Height

60.0”

60.0”

Total Weight

3100 lbs

3600 lbs

 


 
 

 

Wyvern Fabricating Solutions
1257 Sanguinetti Road #159, Sonora, Calif. 95370  Phone (209) 559-9150